Comrex BRIC-Link II - good? bad?

What equipment’s hot, and what’s not? Regulatory matters – discuss!

Moderators: shawnski, jdenver, patgillen, jeffy, pmsimon

Post Reply
Posts: 1
Joined: Mon Jan 27, 2020 8:43 am

Comrex BRIC-Link II - good? bad?

Post by cxristopher » Thu Jul 09, 2020 7:12 pm

The university station I work at is looking at possibly getting the BRIC-Link II to use for STL. Does your station have/had it? If so, do you have any complaints about it or issues with it?

Posts: 3
Joined: Fri Oct 02, 2009 8:35 am

Re: Comrex BRIC-Link II - good? bad?

Post by jeffberlin » Sun Jul 12, 2020 6:18 pm

I've heard of BRIC-Links used successfully as STL's. I have two original BRIC-Links for bridging between two locations. They've been rock solid reliable, using only consumer cable internet. If you use Linear PCM it's typically 16ms latency, fast enough for monitoring directly off the air if there's no delay from HD.

Posts: 18
Joined: Tue Jul 14, 2020 4:35 am

Re: Comrex BRIC-Link II - good? bad?

Post by kayburton89 » Tue Jul 14, 2020 4:43 am

I like using it. BRIC-Link provides for an elegant way of moving linear or compressed audio with very low delay. I didn't have any problems with it, quickly finds a connection, and fast in working.

Post Reply