Non-profit LPFM Seeking Engineering Help

What equipment’s hot, and what’s not? Regulatory matters – discuss!

Moderators: shawnski, patgillen, jeffy, jdenver, pmsimon

Post Reply
patrick1037
Posts: 14
Joined: Fri Jun 18, 2010 12:40 pm

Non-profit LPFM Seeking Engineering Help

Post by patrick1037 » Sat Jun 24, 2017 2:29 pm

KQUA is a LPFM in Roseburg, Oregon. We began broadcasting in February. As of June, I was brought on to take on programming. We have a very simple setup which allows us to pretty much be on-air.

However, we have some engineering needs that are hard to come by here in this region. Our biggest need is setting up the EAS. My engineering experience ends at setting up and running remotes.

Eventually, we will be building a bigger and more professional studio. We basically have a Yamaha MG82cx mixer which is plugged into the transmitter., a computer and two mics.

We are able to write grants, but we are still in the beginning stages and really haven't formed our marketing team. We are in need of engineering help and equipment donations. We can help with a donation write-off. We can also try to work out other arrangements for help if needed.

Trick Schneider
Program Director
KQUA.org

jackatnite
Posts: 2
Joined: Sun Sep 16, 2012 11:43 am

Re: Non-profit LPFM Seeking Engineering Help

Post by jackatnite » Tue May 08, 2018 1:11 pm

Did you find the help you need? I noticed this was dated June of 2017. jack@wytx.fm is my email.

Post Reply